03.10.2026
Kitchen inventory checklist for furnished rental property inspection
The move-in inspection (état des lieux) for a furnished rental is a contractual document that binds the landlord and tenant regarding the exact condition of the property at the moment of taking possession. The kitchen, with its appliances, dinnerware, and mandatory equipment, is the room most likely to generate disputes if it is not detailed with precision. This checklist ensures you don't overlook anything, whether you are a landlord or an incoming tenant.
1. Mandatory equipment according to the law: what the landlord must provide
Decree no. 2015-981 of July 31, 2015, lists the furniture and equipment required for a property to be classified as furnished. For the kitchen, the text requires: stovetops, an oven or microwave oven, a refrigerator with a compartment capable of keeping food at a temperature of -6 °C or lower, sufficient dinnerware for the occupants, kitchen utensils, a table, and chairs. Without these items, the lease cannot legally be classified as furnished.
These obligations apply to each change of tenant: if an appliance was present but broke down between two rentals, it must be replaced or repaired before the keys are handed over. A systematic check of the appliances before each move-in prevents litigation in the very first days of the lease. For a complete summary of required equipment, consult our guide to mandatory equipment in furnished rentals.
2. Large appliance checklist: what to check appliance by appliance
For every large appliance, the move-in inspection must specify: the brand and model (to assess depreciation in case of disagreement), the visual condition (clean, signs of wear, chips), and the functional status (tested and functional, or defect reported). For the refrigerator: verify that the motor runs, the fridge compartment temperature is below 4 °C, and the freezer compartment reaches -18 °C. For the stovetop: turn on each burner and confirm that the heat is consistent. For the microwave: heat a glass of water for 30 seconds and check that the liquid is hot.
Photograph each appliance from several angles with the date visible (photo of the appliance screen turned on or the fridge thermometer, shot of the stovetop with each burner lit). These photos, attached to the signed move-in inspection, are your irrefutable proof in the event of a dispute. If an appliance already has a defect, mention it explicitly ("microwave functional but interior glass cracked, photos no. 4 and 5"): this protects you from being held responsible for pre-existing damage.
3. Dinnerware and utensil checklist: quantities and condition
The law requires dinnerware and utensils "in sufficient quantity" without specifying an exact number. The commonly accepted practical rule is to provide at least as many sets of cutlery, plates, and glasses as the number of beds in the property plus one. For a studio rented to one person, 2 dinner plates, 2 soup plates, 2 bowls, 4 glasses, 2 mugs, 2 forks, 2 knives, 2 tablespoons, and 2 teaspoons are a reasonable basis.
For utensils, the minimum expected includes: a saucepan, a frying pan, a kitchen knife, a cutting board, a can opener, a peeler, and a colander. The move-in inspection must list each item with its condition (new condition, good condition, used condition, significant scratches, chipped). A detailed inventory makes it possible to charge for the replacement of a broken or missing piece during the move-out inspection, leaving no room for interpretation.
4. Kitchen furniture and storage: doors, hinges, and countertops
Kitchen furniture is often the first thing to deteriorate in a rental: misaligned hinges, scratched cabinet fronts, broken drawer slides, burned or peeling countertops. The move-in inspection must describe each element: number of wall cabinets, number of base cabinets, condition of hinges (well-adjusted or visible play), condition of fronts (no damage or identified scratches), condition of the countertop (burns, cracks, peeling edges).
The backsplash and tiling must also be noted: dark or discolored grout, cracks, chipped or detached tiles. The sink deserves special attention: scaling, scratches, condition of the sink-to-backsplash seal (a silent leak from this seal can cause significant water damage in just a few weeks). The mixer tap must be tested: cold water, hot water, and absence of leaks at the base.
5. Kitchen electrical installation: points to check
The kitchen's electrical installation is a source of risk often overlooked in move-in inspections. Note the number of available sockets in the kitchen and verify they are grounded (three-pin plug or two-pin plug with a central grounding pin). The NF C 15-100 standard recommends a minimum of 6 sockets in a kitchen, including at least 4 on the countertop. In older properties, it is common to have only 2 or 3: report this in the move-in inspection if that is the case.
Also check the kitchen lighting: working bulb(s), condition of the light fixture, presence or absence of lighting under the wall units. If the range hood is integrated, test the extraction (or recycling), the fan speeds, and the hood's light. A hood whose filter has not been cleaned for several years is an element to note: it will be less efficient and potentially noisier.
6. Phrasing template for the kitchen move-in inspection: concrete examples
The precision of vocabulary in a move-in inspection is decisive. "Good condition" is insufficient; "good condition, clean, functional, no visible marks" is exhaustive. Here are examples of suitable phrasing: Fridge-freezer — brand X, model Y, functional (cold: 3 °C, freezer: -18 °C verified), clean, door seal intact, no signs of excessive frost. Induction stovetop — 4 functional burners, glass-ceramic surface with no cracks, clean. Microwave — functional (hot water test performed), interior clean, turntable present and intact.
For small equipment, an appendix table is more readable than a paragraph: column 1 (item), column 2 (quantity), column 3 (condition), column 4 (notes). This table is signed by both parties at the same time as the main move-in inspection. If you equip your property with an all-in-one appliance like the ULTMX Quatro, note its four functions (induction hob, microwave, fridge, freezer) on a single line with the appliance's serial number: you cover four legal obligations in one inventory entry.
Conclusion
A rigorous kitchen inventory at move-in is the best investment of time a landlord can make. It prevents disputes at move-out, documents the actual condition of equipment, and ensures the legal compliance of the property. Use this checklist at every change of tenant, supplement it with dated photos, and archive it with the signed lease. For equipment to provide in an Airbnb or furnished rental, our dedicated guide will give you other practical tips.
Frequently asked questions
How long should I keep a kitchen move-in inspection after the lease ends?
Keep the move-in and move-out inspections for at least 3 years after the lease ends (the statute of limitations for civil liability claims). If a dispute is ongoing, keep it until final settlement. Always digitize paper move-in inspections to have a backup copy.
What happens if the tenant refuses to sign the move-in inspection?
If the tenant refuses to sign, call a bailiff (huissier de justice) within 24 hours. A move-in inspection conducted by a bailiff has the value of an official report. Bailiff fees are shared equally between the landlord and the tenant according to the ALUR law.
Can the landlord charge for the replacement of a broken plate?
Yes, if the plate was noted as being in good condition at move-in and is broken or missing at move-out. The charged amount must take into account depreciation (a entry-level plate bought 5 years ago cannot be billed at the price of a new one). A depreciation schedule agreed upon with the tenant at move-in simplifies this calculation.
Must an old but functional appliance be replaced before handing over the keys?
No, the law requires equipment to be functional, not new. However, if an appliance breaks down regularly or presents safety risks, the landlord is obligated to replace it. A refrigerator that does not maintain -6 °C in the freezer is not compliant with mandatory standards.
Should the brand and model of each appliance be noted in the move-in inspection?
It is not legally mandatory but strongly recommended. The brand and model make it possible to assess the age and residual value of the appliance in the event of a dispute regarding damage. A high-end fridge and a low-end fridge do not have the same residual value after 5 years.
Must the tenant clean the kitchen before leaving?
Yes. The move-out inspection compares the condition of the property to that at move-in. If the kitchen was clean at move-in, it must be clean at move-out. Insufficient cleaning can justify withholding part of the security deposit up to the actual cost of professional cleaning.
Is it necessary to have a specific kitchen inventory for a seasonal rental?
Yes, and it must be even more detailed because tenant turnover is faster. An assessment at each departure is ideal for short-term rentals. Platforms like Airbnb offer integrated damage reporting functions, but they do not replace a written inventory signed by both parties.
Is a move-in inspection carried out without the tenant's presence valid?
No. The move-in inspection must be carried out in the presence of both parties (or their legal representatives). If the tenant cannot be present, they can mandate someone in writing. A move-in inspection drawn up unilaterally by the landlord has no legal value in the event of a dispute.
Should chipped dinnerware be replaced before handing over the keys?
A chip on a plate or bowl creates micro-cracks that can harbor bacteria and represents a risk of injury. A responsible landlord replaces chipped dinnerware before each new move-in. It is also a positive signal to the incoming tenant: it shows that the property is maintained with care.
How do you manage the inventory for a kitchen equipped with an all-in-one appliance?
Note the appliance as a single item with its serial number, then list its functions: induction hob (N burners, functional), microwave (functional, test performed), refrigerator (temperature verified), freezer (temperature verified). This presentation covers all legal obligations in a single inventory entry.